Crane systems
Homa High current

HOMA for Crane systems

HOMA switches are used in cranes that lift 50t or more. The main application are emergency switches to switch off the crane. Further also the main switch of the crane could be operated by HOMA switches.

Crane systems. Products

HOMA Switchgear

For over 60 years

HOMA switches are being built into different applications for more than 60 years and have been supplied to more than 100 countries. Due to the worldwide experience of HOMA, many national and international norms can be fullfield and have conducted a vast number of type tests for our products. We equip our switches with coils that can be operated worldwide with 60V to 480V AC/DC. The worldwide distribution network ensures minimal downtimes in case of a break down. HOMA is known for short delivery times and due to its modular design, switches can be assembled and delivered within 24 hours.

HOMA Switchgear - switching

Switching

Air-break contactors and combinations of switches to deal with normal to complicated switching activities for all types of electrical loads.

HOMA Switchgear - isolation

Isolation

Sliding contacts, air-break contactors and air- or water-cooled high current switches for galvanic interruption of circuits without a control current for technical or safety reasons.

HOMA Switchgear - distributing

Distributing

Different types of commutators to select different sources or for an alternative supply of the electrical load circuit.

HOMA Switchgear - controlling

Controlling

Commutators and pole-reversal contactor including associated control systems, reversing contactors etc. for process-related reversion of the electrical current or rotational direction; braking contactors for switchoff for drives that simultaneously trigger dynamic braking systems.

HOMA switchgears - regulating

Regulating

Starting contactor / rotor-short circuit contactor, as well as starting coupling contactor / cascade coupling contactor for large machinery in association with subsynchronous static converter systems cascade; capacitor contactors for balancing or compensating inductive electrical loads. Starting, damping and discharge resistors.

HOMA Bar mounted Contactors

In HOMA Bar mounted Contactors current-carrying components are organized on the basis of a main frame construction. All required modules are arranged on top of a single frame (bar), for example: Magnet system, Terminal plate for power circuit, Switch locking system and Movable contacts. The two examples below (G500 / HAT-2W) illustrate the construction.

TYP G500

1
magnet system
2
coil
3
auxiliary contacts
4
U-profil
5
control unit
6
terminal plate
7
grounding
8
main frame
9
nc-current pole
10
no main poles
Bar mounted Contactors - TYP G500

TYP HAT-2W

1
switch lock. system
2
magnet system
3
coil
4
Hilfskontakte (3No + 3NC)
5
auxiliary contacts
6
u-profile
7
stationary contact
8
Connection
9
main frame
10
movable contacts
Bar mounted Contactors - Typ HAT-2W

HOMA Cables

High Current Cables

95mm² to 8.000mm². Air- and watercooled.

Products

Copper tubes

HOMA offers engineering and fabrication of copper tube systems.

Products

Busbar systems

Bus bars with a thickness of 5 mm to 15 mm and a width of 20 mm to 200 mm.

Products

Electrode arms

Components for LHF, EAF and DC furnaces.

Products

As a system supplier in the field of high current technology our product portfolio includes a variety of power connections. Beside a high flexibility, our products are known for a long life time and reliability.

Current Carrying Connections

© 2018 HOMA Hochstromtechnik